MADERAS SAN MARTIN produces a wide range of parquet and flooring products using leading-edge technology to dry, stabilize, mechanize and control the final product. The solid wood flooring is distinguished by the following characteristics:
• Sawing in our own premises: Radial sawmilling.
• High-technology kiln drying: HIGH VAC.
• Complete moisture control of 100% of the production.
• Various dimensions depending on demand:
 Length: 50cm – 350 cm
 Thickness: 14 mm – 22 mm
 Width: 65 mm – 150 mm
• Shade classification (Elondo 6 colours, Jatoba 2 colours, American oak 2 colours…) and homogeneous selection.
• Tongue & Groove on four sides.
• Interior solid wood flooring and exterior decking.
• MSM works with catalogue and at the request of our customers:
Elondo, American Oak, Iroko, Jatoba, Ipe, Doussie, Grapia, Cumaru, Taurí, Wengé,...Apart from these products, we produce solid wood blocks or lamparquet: Traditional system of strips glued to the floor.
Species: Elondo, American Oak, Iroko, Jatoba, Ipe, Doussie, Grapia, Cumaru, Taurí, Wengé,...
Dimensions:
Length: 250cm – 450 cm
Width: 50 mm – 80 mm
Thickness: 10 mm – 15 mm

FLOATING FLOORS

MADERAS SAN MARTIN flooring is a top quality product.
Our floating floors reach the highest quality in a range of 1, 2 and 3 wooden strips.
Characteristics:
Floating floors consist of of 3 ply-wood layers glued together. The top hardwood layer is fine wood and it is covered by 9 veneers of ceramic and polyurethane varnish, glossy or matt.
According to the joining system, our floating floors can use:
• Click System.
• Glue system.
Species: Oak, Beech, Merbau, Kempas, Jatoba, Cherry…
Dimensions:
Lengths: 1950 - 2200mm
Widths: 189mm - 202 mm
Thickness: 10, 14 and 15mm / Fine layer: 2,3 and 4 mm.

SYNTHETIC FLOARING

In our catalogue MADERAS SAN MARTIN has included new range and generation of synthetic flooring.
Characteristics:It is constructed of long synthetic HDF boards, high density, which is covered by a decorative laminated high-pressure layer. It is particularly strong and water-resistant with click system.
Dimensions-types:
• Lengths: 800 - 1900mm
• Widths: 150mm - 202 mm
• Thickness: 7, 8.2 and 10 mm
According to their resistance, it is distinguished from AC1 to AC5 of heavy commercial use, from which the AC3 is the most common used. According to shades, there is a wide variety imitating natural species.